Mastercool 55800 INTELLASENSE REFRIGERANT LEAK DETECTOR FOR COMBUSTIBLE GASES, HYDROGEN AND ALL REFRIGERANTS. WORKS WITH R1234YF, R32 AND R410A.

Mastercool 55800 INTELLASENSE REFRIGERANT LEAK DETECTOR FOR COMBUSTIBLE GASES, HYDROGEN AND ALL REFRIGERANTS. WORKS WITH R1234YF, R32 AND R410A.WAIT: This indication flashes whenever the unit is in the wait mode. This could occur whenever the unit is turned on or interference is detected READY: This indication appears when the unit is ready for use INT: This indication appears whenever the microprocessor detects conditions that are not suitable for reliable leak detection. Excessive wind blowing, blocked probe (no air flow), burned out fan, or a missing or defective sensor that needs to be

WAIT: This indication flashes whenever the unit is in the wait mode. This could occur whenever the unit is turned on or interference is detected
READY: This indication appears when the unit is ready for use
INT: This indication appears whenever the microprocessor detects conditions that are not suitable for reliable leak detection. Excessive wind blowing, blocked probe (no air flow), burned out fan, or a missing or defective sensor that needs to be replaced
BATTERY SYMBOL: When the battery symbol becomes illuminated this is an indication that the battery is low and needs to be replaced
H - M - L: High, Medium and Low sensitivity ranges will be displayed accordingly based on the selection made on the keypad
SIGNAL LEVEL BARS: There are 10 vertical signal level bars on the display corresponding to the level of signal detected by the unit
ERROR SIGNALS: E1 through E9 indicates diagnostic signals
SENSITIVITY:
HIGH - 0.15 oz/yr (4.25 g/yr)
MEDIUM - 0.25 oz/yr (7 g/yr)
LOW - 0.5 oz/yr (14 g/yr)
PROBE:
Intelligent tip design that senses the condition of the environment, to eliminate the potential of false alarms.
Flexible 16" probe for difficult to reach locations
DISPLAY:
Progressive LCD with vertical bars corresponding to the magnitude of the detected leak
Visual indication of the selected sensitivity range
REFRIGERANTS:
Detects all refrigerants (CFC's, HCFC's, & HFC's)
Unit has been tested and approved to work with R1234yf as well as R32 and R410a
SENSOR LIFE: 2000 hours
OPERATING TEMPERATURE RANGE: 0 to 140��F
POWER: Two (2) D Batteries
BATTERY LIFE: 60 hours continuous use
WEIGHT: 1 lb. 8 oz
Super Sensitive Function allows the unit further sensitizing beyond the standard settings for locating small leaks with gases such as R1234yf and R407C