Combi Clamp Sheep System with curved panel sets

Combi Clamp Sheep System with curved panel setsThe Combi Clamp Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that they can be driven into the ground. All Ritchie Sheep handling equipment has safe edged sheeting to prevent cuts and abrasions. On the straight sheeted sections the sheet is folded over the frame and the joints are recessed for strength. Heavy duty paneling is used for long working life. A Curved Panel

The Combi Clamp Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that they can be driven into the ground. 

All Ritchie Sheep handling equipment has safe edged sheeting to prevent cuts and abrasions. On the straight sheeted sections the sheet is folded over the frame and the joints are recessed for strength. Heavy-duty paneling is used for long working life. 

A Curved Panel Sheep Handling System can easily be assembled using the following components:

• 2 x 8 ft Sheeted Panels
• 2 x 6ft Open Rail Panels
• 1 x 4 ft Open Rail Panels
• 3 x 8 ft Open Rail Panels
• 10 x Joining Pins
  
• 1 x 2 ft Guillotine Gate (can choose the Guillotine - Walk through Gate instead for extra money)
• 1 x 8 ft Swing Gate in Frame
• 2 x Combi Clamp Curved Panel Sets
• 1 x Combi Clamp w/ load up Ramp
• 1 x 3-way Sorting Gate

Optional : 

• Foot Rot Bath
  
• Lamb Cushion Wall
• Weigh Kit w/ Tru-Test MP800 Load Bars
• Tru-Test Weigh Indicator XR5000, ID5000, 7i Indicator or S3 
• Auto Sort kit
• Tru-Test Stick Reader SRS2 or XRS2