Draper Bandsaw, 305mm, 750W 84714

Draper Bandsaw, 305mm, 750W 84714This two speed bandsaw is designed to cut wood, wood derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut

This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718).

Contents

1 x 4tpi blade
1 x Parallel rip fence
1 x Open ended spanner
1 x Push stick
4 x Hex keys
4 x Pan head screw, M7 x 12mm
4 x Washers, 8.5mm
4 x Plastic wing bolts

Specifications

Voltage: 230V
Frequency: 50Hz
Input: 750W
No load speed: 1400rpm
Maximum throat capacity: 305mm
Cutting depth: 165mm
Maximum capacity: 172mm
Cutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min)
Table size: 390 x 480mm (Tilt to 45 degrees)
Bandsaw dimensions: 750 x 520 x 1170mm
Weight: 57kg