Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
750 CFM Street HP Carburetor - 0-82751Overview: The Street HP uses the best features from Holley's race Bred 4150 HP carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HP and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street strip engine setup for outstanding throttle
Overview:
The Street HP™ uses the best features from Holley's race Bred 4150 HP™ carbs, but tamed for street and light competition use.
The Street HP features the contoured main body from the 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used on the 650 and 750 cfm models so there are plenty of vacuum ports for power brakes, PCV, etc.
The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor.
Limited to stock. replaced by 0-82751SA
Features:
- Vibratory polished for good looks
- Optimized street/strip calibration for outstanding throttle response and drivability
- Contoured venturri inlet offers balanced airflow for increased horsepower
- Screw in air bleeds for precision tuning capabilities
- Four corner idle for precise idle control
- Mechanical secondaries for awesome tire turning performance
- Dual accelerator pumps for additional fuel under initial acceleration
- Dual feed fuel inlets for constant high volume fuel delivery
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
- Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Application:
| Year | Make | Model | Submodel | Engine Size |
|---|---|---|---|---|
| Universal |
Specs:
| Barrels | 4 |
|---|---|
| Booster | Down Leg |
| Brand | Holley |
| Carburetor Use | Performance and Race |
| CFM | 750 |
| Choke | None |
| Condition | New |
| Emission Code | 3 |
| Finish | Shiny |
| Fuel | Gasoline |
| Fuel Inlet | Dual |
| High Speed Air Bleed | 36 |
| Idle Air Bleed Size | 71 |
| Marine Use | No |
| Material | Aluminum |
| Model | 4150 |
| Primary Main Jet | 77 |
| Primary Power Valve | 4.5 |
| Primary Pump Nozzle Size | 28 |
| Product Type | 4150 Model Carburetor |
| Secondaries | Mechanical |
| Secondary Main Jet | 84 |
| Secondary Pump Nozzle Size | 31 |
| Supercharged Application | No |
| Throttle Bore | 1.688 inch |
| Venturii Size | 1.375 inch |
| Warning | California Proposition 65 |
| Warranty | Limited 90 Day |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 259 reviews
Sort
Product Reviews
★★★★★ 3
Missing Dividers
Color: Black, Size: 9.4*4.1*5IN
Disappointed it was missing the adjustable dividers.
Not great to hold dishwashing brushes. They slip right threw the side.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
★★★★★ 4
Sturdy. Built to last. It solves all the problems my old organizer had. Very satisfied.
Review for ARTLEO Kitchen Sink Caddy with Super Water Absorbent Diatomite Stone Sink Tray, Fast Drying Sink Organizer with High Dish Brush Holder Sponge Holder for Kitchen Sink, Stainless Steel
This appears to be a sturdy organizer of stainless steel painted with a good amount of black protective paint. I ordered it to replace an inferior organizer of the same material (made by a different company altogether).
This one solves the problems I had with my previous organizer which had begun to rust and break apart after six months of use.
The narrow steel bars on the bottom shelf of this new organizer are supported by wider steel flats in the frame that will prevent them from breaking off the frame. (My old organizer bars broke because they were barely welded onto the frame and the repeated "pushing down" of my soap pump-bottle eventually broke them apart from the frame).
The pads that prevent it from sliding across my counter in big waves (we live and travel on a boat) are secured around the steel legs as opposed to just being glued onto the bottom (like the pads of my previous organizer were, which fell off). There is no metal hanging over onto the sink edge to cause rust (like the metal that had caused rust with my old organizer.)
The dish-brush holder can fit on the inside of the frame or it can hang on the outside of the organizer, which is nice because it makes more room if you have many tools that you like to use at the sink. And it can be compact if you don't. Be cautious not to remove the hanging part (dish-brush holder) too often because repeated wear can cause the paint to rub off and it could begin to rust.
The "Water Absorbent Diatomite Stone" is new to me but it seems to be working just fine. I assume I will have to clean out the ridges of it as gunk forms there, but that would be the case with any sink organizer tray.
I am very satisfied with this organizer, it is robust and it solves all the problems I had with my previous one.
The price is on the higher side of similar organizers, currently priced at $23.99.
All the best,
Mrs. dr
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
★★★★★ 5
Terrific Buy!
Color: Brown, Size: 13"D x 23.7"W x 32.7"H
I couldn't be happier with our new very handy piece of furniture. The tea/bar cart (I chose classic brown with the black iron) looks like a much more expensive purchase than it is. It's well-designed, well-made, and very easy to assemble, even for me: all of the holes, screws, bolts, etc., align perfectly for a level, sturdy, squared, and pleasing cart that can serve a multitude of purposes, depending on your household's needs.
I just bought a second. They really are just that versatile and good-looking, and they require little space.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 23, 2026
★★★★★ 5
GREAT
Color: Marble Gold, Size: 13"D x 23.7"W x 32.7"H, Color: Marble Gold, Size: 13"D x 23.7"W x 32.7"H
It was so easy to assemble I’m impressed and it looks so cute and not cheap at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
No complaints
Color: Brown, Size: 13"D x 23.7"W x 32.7"H
This is a great bar cart. The shelves hold up with a bunch of bottles on it. To be fair, we do not wheel it around. It just stays in one spot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026