Treated Gravel Board Sawn Timber 22mm x 200mm (8x1)

Treated Gravel Board Sawn Timber 22mm x 200mm (8x1)Treated gravel boards in 22mm x 200mm (8x1) sawn timber are the standard choice for protecting the base of timber fence panels from ground moisture and rot. Cut from Scandinavian redwood and pressure treated for ground contact, each board is supplied in a 4. 8 metre length ready for outdoor installation. Specifications Material Scandinavian redwood (Pinus sylvestris) Treatment Pressure treated, suitable for ground contact Grade Ungraded Finish Rough

Treated gravel boards in 22mm x 200mm (8x1) sawn timber are the standard choice for protecting the base of timber fence panels from ground moisture and rot. Cut from Scandinavian redwood and pressure treated for ground contact, each board is supplied in a 4.8 metre length ready for outdoor installation.

Specifications

What it's used for

• Fitted horizontally at the base of close-board or panel fencing to protect the lower edge from soil contact and standing water
• Used as a kickboard beneath feather edge boarding to keep the bottom course clear of the ground
• Agricultural and field boundary fencing where a low-level barrier is needed between posts
• General outdoor construction and garden projects requiring a wide, treated flat board

Fitting and handling

Allow boards to acclimatise outside, under cover, for 48 hours before fitting where possible, particularly in wet weather. Fix to fence posts using galvanised or stainless steel screws or nails to avoid corrosive reactions with the treatment chemical. The rough sawn surface accepts fence paint, creosote substitute, and oil-based preservatives well, and re-coating the cut ends after trimming on site will help maximise service life.

FAQ

What is a gravel board used for in fencing?

A gravel board sits horizontally at the base of a fence between posts, keeping the main fence panels or feather edge boards clear of the soil. This prevents the timber from sitting in standing water and significantly extends the life of the fence above it.

Is this gravel board suitable for direct ground contact?

Yes. This board is pressure treated to Use Class 4 (UC4), which means it is rated for direct ground contact and in-ground use in exterior applications. It is the correct treatment level for a board that will sit at or near soil level.

What does 22mm x 200mm (8x1) mean for a gravel board?

These are the nominal sawn dimensions: 22mm thick and 200mm wide. The 8x1 label is the traditional imperial equivalent (8 inches by 1 inch). Because the board is rough sawn rather than planed, the finished size will be close to but not exactly the nominal dimension.

Nottage Timber Merchants stock a full range of fencing timber including feather edge boards to pair with these gravel boards. We supply trade and retail customers across South Wales, with timber available for collection from our Bridgend yard or delivery to the local area.