2011/2014-2015 Can Am Commander 1000 4X4 Front Clutch Variator Kit 0900-0292
SKU: 29547258518

2011/2014-2015 Can Am Commander 1000 4X4 Front Clutch Variator Kit 0900-0292

$156.94 $174.38
Save 10%
No.2 Bestseller on intrade-apc.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2011/2014-2015 Can Am Commander 1000 4X4 Front Clutch Variator Kit 0900-0292Front Clutch Variator Kit 0900 0293 Fit For Can Am Commander Max 800R 1000 Xt Dps FEATURES: Aftermarket 100% Brand New and Quality Guaranteed. Adopted high quality materials that meet or exceed original requirements. Stable characteristics, high reliability, long service life. Professional installation will be highly recommending,instruction NOT included. Specifications: Condition: Aftermarket 100% Brand New Material: High Quality Metal Placement on

Front Clutch Variator Kit 0900-0293 Fit For Can Am Commander Max 800R 1000 Xt Dps

FEATURES:
Aftermarket 100% Brand New and Quality Guaranteed.
Adopted high quality materials that meet or exceed original requirements.
Stable characteristics, high reliability, long service life.
Professional installation will be highly recommending,instruction NOT included.

Specifications:
Condition: Aftermarket 100% Brand New
Material: High Quality Metal
Placement on Vehicle: Front
Replacement Part Number:OEM:0900-0293 0900-0292

Fitment:
OEM:0900-0293
Can Am Renegade 1000 2012-2019
Can Am Outlander 1000 2012-2019

OEM:0900-0292
Can Am Commander Max 800R 4x4 DPS
Can Am Commander Max 1000 4x4 XT DPS 2016-2017
Can Am Commander Max 1000 4x4 XT Camo DPS 2016
Can Am Commander Max 1000 4x4 XT 2014-2015
Can Am Commander Max 1000 4x4 LTD 2015
Can Am Commander Max 1000 4x4 Limited DPS 2016-2017
Can Am Commander Max 1000 4x4 DPS 2014-2017
Can Am Commander Max 1000 4X4 2014
Can Am Commander 800R 4x4 XT EFI 2012-2013
Can Am Commander 800R 4x4 XT DPS 2016-2020
Can Am Commander 800R 4x4 XT Camo DPS 2016
Can Am Commander 800R 4x4 XT 2011/2015
Can Am Commander 800R 4x4 EFI 2012-2013
Can Am Commander 800R 4x4 DPS EFI 2013
Can Am Commander 800R 4x4 DPS 2015-2020
Can Am Commander 800R 4X4 2011/2015-2020
Can Am Commander 800 4X4 2014-2015
Can Am Commander 800 4x4 XT Rear Open Differential 2014-2015
Can Am Commander 800 4x4 XT 2011/2014-2015
Can Am Commander 800 4x4 DPS 2014-2015
Can Am Commander 1000 4x4 XT-P/Limited /Mossy Oak Hunting Edition DPS 2016-2017
Can Am Commander 1000 4x4 XTP 2014-2015
Can Am Commander 1000 4x4 XT/X/LTD EFI 2012-2013
Can Am Commander 1000 4x4 XT DPS 2016-2017
Can Am Commander 1000 4x4 XT Camo DPS 2016
Can Am Commander 1000 4x4 XT 2011/2014-2015
Can Am Commander 1000 4x4 LTD 2013-2015
Can Am Commander 1000 4x4 EFI 2012-2013
Can Am Commander 1000 4x4 DPS EFI 2013
Can Am Commander 1000 4x4 DPS 2014-2017
Can Am Commander 1000 4X4 2011/2014-2015

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)
Please do not purchase if yours looks different or size's different, it will not fit.

Package includes:
1 set of Complete Front Primary Variator Clutch
(You will get exactly what you see in picture)

Note:
Compatibility only for reference,please check out the size & part numbers fits your motorcycle or not.
This is an aftermarket part,not an original part.

Warranty:
Guarantee Period: 1 Years
Returns & Refunds: Customers can return the goods within 60 days of receipt and process quick refund within one day
24-Hour Support: Provide you with timely after-sale support

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 29547258518

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 785 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mike
Charlottesville, US
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console. The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
E
Verified Purchase
Ezra
Whiting, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
N
Verified Purchase
Nikki05
Port Orchard, US
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
R
Verified Purchase
Raniel Nebrida
Grantham, US
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CJKA
Charlottesville, US
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026

recommand products

Snapcaster Mage (Borderless) (Chocobo Track Foil) (469) (Foil) [FINAL FANTASY]
164.29
Yuna, Grand Summoner (Borderless) (Surge Foil) (216) (Foil) [FINAL FANTASY]
165.37
Evangelion Production Model-New 02 (SR*) (UE15BT/EVA-1-043) (Foil) [UE15BT: Evangelion: New Theatrical Edition]
29.80
Painter's Servant (Borderless) (147) (Foil) [Special Guests]
36.72
Tifa, Martial Artist (Borderless) (206) (Foil) [FINAL FANTASY]
58.50