Wera 074722-010 Custom Pre-Set Fixed Torque Screwdriver, 11.0 - 29.0 in-lbs

Wera 074722-010 Custom Pre-Set Fixed Torque Screwdriver, 11.0 - 29.0 in-lbsWera 074722 010 Custom Pre Set Fixed Torque Screwdriver, 11. 0 29. 0 in lbs For any application where the same constant torque and repeat accuracy are required Desired fixed torque setting can be made in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb. Fixed value can also be easily adjusted between 11. 0 and 29. 0 in lbs using Wera's Recalibration Kit and any appropriate

Wera 074722-010 Custom Pre-Set Fixed Torque Screwdriver, 11.0 - 29.0 in-lbs

For any application where the same constant torque and repeat accuracy are required
Desired fixed torque setting can be made in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can also be easily adjusted between 11.0 and 29.0 in-lbs using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 105 mm
Total length: 155 mm
Manufacturer's part number 05074722010

Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.