SKU: 69731821360

Blackmagic Design Spares - ATEM TV Studio HD - Labels

Sale price$344.14 Regular price$382.38
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Blackmagic Design Spares - ATEM TV Studio HD - LabelsThe Blackmagic Design Spares ATEM Television Studio HD Labels are the clear plastic "lens" caps and the corresponding text inserts used to identify sources on the front panel of the 1RU rackmount switcher. Unlike the "Pro" models which have a full console, the standard ATEM TV Studio HD features 8 small, high cycle buttons on the front plate. These labels are crucial for quick identification in a dark rack or broadcast environment. Whats Included in a

The Blackmagic Design Spares - ATEM Television Studio HD - Labels are the clear plastic "lens" caps and the corresponding text inserts used to identify sources on the front panel of the 1RU rackmount switcher.

Unlike the "Pro" models which have a full console, the standard ATEM TV Studio HD features 8 small, high-cycle buttons on the front plate. These labels are crucial for quick identification in a dark rack or broadcast environment.


What’s Included in a Label Set

  • Clear Snap-on Keycaps: The transparent plastic housings that protect the label and distribute the LED light (Green for Preview, Red for Program).

  • Text Inserts: Small film or paper strips with standard broadcast labels:

    • CAM 1 – CAM 8

    • GFX 1 / GFX 2

    • PC / MAC

    • VTR / REPLAY

    • BLACK / BARS

Why Replace Them?

  • Yellowing: Constant exposure to the internal LEDs and ambient heat can cause the clear plastic to turn a "tobacco" yellow, making it hard to see the tally colors.

  • Loss: During a deep clean of the front panel, these small caps are easily dropped or lost.

  • Physical Damage: Excessive force or the use of sharp tools to "pop" them off can crack the retention clips on the side of the cap.

  • Adhesive Residue: If an operator used "gaffer tape" or "board tape" directly on the button instead of using the internal insert, the cap may be permanently sticky or clouded.


Installation and Customization

Repair Level: 1 (Very Easy). 1. Removal: Use a plastic pry tool or a small flathead screwdriver (wrapped in a thin cloth to prevent scratching the paint) to gently lift the edge of the clear cap. It should pop straight up.

2. Insert Placement: Place your text strip inside the cap.

3. Seating: Align the cap with the square button stem and press down firmly until it "clicks" into place.

Pro-Tip: Creating Custom Labels

If the standard labels don't match your workflow (e.g., you need "DRONE" or "ZOOM"), you can create your own:

  • The Size: The inserts for the TV Studio HD front panel are approximately 10mm x 10mm.

  • The Material: Use Matte Transparency Film. Using standard printer paper will block too much light and make the button look "dim" when it turns red or green.

  • The Look: Print black text on a clear background for a clean look, or white text on a black background for a "broadcast console" aesthetic where only the text glows.


Diagnostic: Label vs. Button Failure

If you are replacing labels because the button isn't lighting up:

  • Check the Software: Ensure the source isn't "Locked" or that the tally isn't disabled in the ATEM Setup.

  • Physical Test: If you swap a working cap to a non-working button and it still doesn't light up, the issue is the LED on the Front PCB, not the label itself.

Are you looking for the standard "CAM 1-8" pre-printed set, or do you just need a handful of the clear plastic caps?

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 69731821360

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 2134 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Sherry
Draper, US
★★★★★ 5
Good shelves for the price can be challenging to install correctly
Size: 16 Inch, Color: White, Size: 16 Inch, Color: White
Good quality shelves for the price. Happy with the purchase. They give you assorted hardware to mount each shelf. Wall anchors for masonry or brick and anchors for drywall as well as screws to affix shelf to the wall bracket. The installation was fairly easy but it can be a bit difficult to get the bracket leveled on the wall. The “level” they give you is useless, it is only the tube - not in a housing, so 1 1/2” long. You will need a better level. Basically you place the bracket where you want the shelf to go then make sure it is level and take a pencil to mark the holes. We ended up using a heavier quality wall anchor so only needed 2 anchors instead of the four they send you. Once the bracket is on, slide the shelf onto the bars coming from the bracket and use the 2 set screws to secure it in place. Check for level and if it isn’t you can remove shelf and loosen bracket screws and wiggle the bracket while still attached while retightening screws. We had to re-level one of our shelves this way. Hope this helps and that it makes sense. As for weight capacity I wouldn’t want to put more than a couple of pounds on a shelf. As it is secure, it is hollow inside and too much weight would probably either cause the shelf to sag or damage your wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2025
E
Verified Purchase
Emy R.
Houston, US
★★★★★ 5
Excellent product with height recommendation
Size: 24 Inch, Color: White, Size: 24 Inch, Color: White
My bathroom renovation is turning out great. These shelves are beautifully stable and show no visible assembly. The idea of ​​these floating shelves is brilliant.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
L
Verified Purchase
Lisa Espinosa
Waukegan, US
★★★★★ 5
Beautiful and sturdy
Size: 24 Inch, Color: White
Excellent quality shelves. All hardware came with them and also the stickers to cover the screws. I also placed a plant on one of the shelves and it’s not leaning and again very nice and secure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
L
Verified Purchase
Lo
San Leandro, US
★★★★★ 5
Great shelves
Size: 24 Inch, Color: White
Easy to assemble and comes with everything you need for drywall or wood. Nice color and texture and comes with stickers to hide the holes underneath. I bought two sets of three. These are very long, so I recommend just using two at a time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
K
Verified Purchase
Khrystal
Los Angeles, US
★★★★★ 5
JAXPETY Room Divider Panel 6Ft Privacy Screen Wall Divider 88" W x 73" H - 3 Panel Black
Color: Black, Size: 3-Panel, Color: Black, Size: 3-Panel
I was looking for a screen to use while making video calls. I am on a budget, wanted something easy to put together, and would hide my apt in the background. Being on a budget, I thought my purchase qualified for the coupon. I was mistaken but contacted the seller. I received a quick response explaining how the coupon was applied. I was happy with the quick response and explanation which I verified when I went back to the page. The once all put together the screens are light weight and fairly easy to move. they do not seem to be made for easy daily breakdown. However, if you should need to take them apart to move or something, easy to break down. Depending on lighting will depend on if you find them transparent. I don't mind possible vague outlines; I was looking so no real details of my belongings in the background could be seen (shelves; figurines; etc.) My apt living room has no overhead light source, so floor lamps give light. In the 3 photos of 2 of the screens put together; the first is with a lamp in front and back of the screen as well as a tv on. The next has the tv off lamps still on and the screen reflecting the pc monitors. The third is with both lamps and the tv off, monitors on but not as reflective. In the box, you have all the parts you need as well as a small tool and an instruction manual. Item 'bags' are number [though they may come off in the box] to assist with assembly. Now assembly can be easy or hard depending on your abilities and the area you are working in. I have bad knees, so kneeling was not an option for me. My first attempt to put this together, I put the 'feet bases' on while still connecting the top bar. It made it twice as hard, and I stretched the fabric more than was necessary causing wholes around some of the stitching and stretching them a little. As well as causing some stitching to come undone on one of the pictured areas. Once I took off the 'feet bases', I had an easier time to screwing in the top bars. You will still need some hand strength, which I don't have much of, but it is possible. I use the grip things to open pickles jars. Once the screens were assembled, I followed the instructions of tying an outer screen to the inner screen and using the Velcro 'privacy flaps' to complete the connection. I have what I think is low shag carpeting which they were able to stand stably on once I wiggled them into standing straight up and in place. Given these post pandemic times, I am overall happy with both the divider and the price. The 2 things I do not like about the divider is the difficulty putting in the top bar [after connecting the top and sides] and storability when not in use issue I am having. Others with larger space will likely not have the last issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2025

recommand products