Libec Mid-level spreader for RT30B

The Libec BR-2B is the dedicated telescopic mid-level spreader engineered specifically for the Libec RT30B and RT20C tripod leg systems. It is designed to replace or serve as an alternative to a traditional ground spreader, providing crucial torsional rigidity and structural stability when operating on uneven ground, staircases, slopes, or cramped location sets.

Core Features & Practical Utility

• Tailored Leg Integration: The BR-2B is custom-fitted to snap securely onto the mid-level accessory anchor castings built into the dual-tube sections of the RT30B aluminum legs.

• Telescopic Sliding Reach: Each of the three structural composite arms features a sliding extension design. By loosening the integrated locking knobs, operators can dynamically telescope the arms outward to widen or narrow the tripod's stance based on the layout of the terrain or physical space limitations.

• Torsional Twisting Prevention: By physically bridging the mid-section of the tripod legs, the spreader stops the legs from splaying outward under the pressure of heavy camera payloads and absorbs torque, eliminating micro-stutters during high-drag panning shots.

• Ultra-Lightweight Profile: Weighing only 0.44 pounds (0.2 kilograms), it provides structural support without adding bulk or significantly increasing the travel weight of the tripod kit.

Hardware Technical Specifications Matrix:

Operational System Tips for the BR-2B:

💡 The Floor Foot Configuration Rule: When transitioning your RT30B tripod from using a floor spreader (like the SP-2B) to the BR-2B mid-level spreader for an outdoor shoot, remember that the bare metal spikes at the bottom of the legs will be exposed. To prevent the tripod from sinking into soft dirt or scratching sensitive indoor surfaces when the mid-spreader is attached, always pair this setup with Libec FP-2B large rubber feet pods, which snap directly over the dual metal ground spikes.

• Streamlined Pack-Down Flow: You do not need to unscrew or detach the BR-2B when breaking down your gear at the end of a production. Simply loosen the arm knobs, telescope the sliding segments all the way back to their shortest position, tighten them down, and fold the tripod legs together normally—the mid-spreader centers itself internally and collapses completely flat against the leg tubes.