SKU: 59554420641

BetaFPV ELRS Nano TX V2 Module - 915MHz

Sale price$52.19 Regular price$57.99
Save 10%

Pay in installments of $14.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BetaFPV ELRS Nano TX V2 Module - 915MHzThe Nano TX V2 Module is packed with upgrades for an unrivaled pilot experience. Featuring the innovative T LED antenna with its flicker frequency indicating signal transmitting and module connection statute. With up to 1W 2W power, it empowers stable links for FPV racing, long range flight, and professional photography. Seamlessly integrate with Backpack and customize buttons. Enjoy fluently flying with the 1804 cooling fan. Unleash your full

The Nano TX V2 Module is packed with upgrades for an unrivaled pilot experience. Featuring the innovative T-LED antenna with its flicker frequency indicating signal transmitting and module connection statute. With up to 1W/2W power, it empowers stable links for FPV racing, long-range flight, and professional photography. Seamlessly integrate with Backpack and customize buttons. Enjoy fluently flying with the 1804 cooling fan. Unleash your full potential with the Nano TX V2 Module.

Note: Please assemble the antenna before powering on. Otherwise, the PA chip in the Nano TX V2 Module will be damaged permanently. 

Check out all our Receivers and the rest of our BetaFPV Products!

 

1W&2W Output Power

The Nano TX V2 Module also offers 3 versions: 2.4 GHz with a maximum output power of 1W, and 915/868MHz with a maximum output power of 2W. Featuring an integrated TCXO, it minimizes frequency deviation for stable performance, eliminating signal interference. Experience stronger signals, longer transmission distances, and an expanded radio transmitter range. With these options, pilots can explore and connect with greater freedom in wireless communication.

 

Longer Range with Stable Link Quality

Nano TX V2 Module is built-in a TCXO (temperature-compensated crystal oscillator). With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long-range flight. Click to learn more about the TCXO. ensuring a super stable yet strong radio link for pilots to fly in any environment that requires extremely stable signals and low latency, including long-range flights, multiplayer flights, and FPV racing. It gives pilots a robust and aggressive flight experience.  

 

T-LED Antenna

The T-LED antenna innovatively integrates LED with the antenna, enabling direct information display on the antenna. When the antenna is successfully connected, the regular flickering indicates the status of signal transmission and reception. The light being on represents signal transmission, while the light being off represents signal reception. The speed of the flickering varies based on the telemetry ratio and packet rate, offering pilots a unique visual experience.

Additionally, it detects the connection status between the antenna and the TX module, preventing damage caused by incorrect usage. The flickering light irregularly during the antenna swinging indicates antenna damage, while flickering irregularly during turning the antenna connector indicates a loose connection in either the antenna or the TX module, requiring replacement.

Note: This T-LED Antenna only lights up on the Nano TX V2 Module. Other antennas like Moxon and Loop can also be used directly on the Nano TX V2 Module(915/868MHz version), but the 2.4GHz version requires an RP-SMA to SMA adapter. 

Cooling System

The Nano TX V2 features a fully injection-molded shell with excellent texture. With its optimized internal airflow channel and a heat sink, a high-speed 1804 cooling fan, it effectively dissipates heat even during high power output, ensuring stable link performance. Pilots can fly with confidence and enjoy reliable performance, thanks to this double-checked cooling solution.

 

Highly Customizable Solution 

Backpack, developed by the ExpressLRS team, is an optional module designed for radio transmitters. It provides enhanced flexibility and scalability, empowering pilots to connect external devices such as goggles, the Nano TX V2 Module offers a highly customizable and expandable solution for pilots' varied application scenarios and functional needs. There are two buttons reserved for pilots to customize their functions, empowering pilots to set buttons according to personal usage habits. 

 

Combination with Most Radio TX

The Nano TX V2 Module could be configured via LUA script. EdgeTX V2.8.0 and OpenTX radio transmitter that supports CRSF could be used easily. It is available for popular Nano port TX like BETAFPV LiteRadio 3 Pro, Radiomaster Zorro/Pocket, Jumper T Pro V2/T20, TBS Tango 2, etc., and Radiomaster TX16, Boxer, and Jumper T16/T20, Frsky QX7, X9 when used with a Micro-Nano Module Adapter.

Note: LiteRadio 3 Pro Radio Transmitter cannot support 500mW due to power supply issues.


ELRS Series

The ExpressLRS Series expands its lineup with the addition of the Nano TX V2 Module. To achieve exceptional link quality. BETAFPV takes the flying experience to new heights by introducing ELRS links that offer long-range capabilities, low latency, and high refresh rates in a radio control system. 


Basic Configuration

In the EdgeTX system, select "MODEL SEL" and enter the "SETUP" interface. In this interface, turn off Internal RF (set to "OFF"), turn on External RF, and set the output mode to CRSF. Connect the module correctly and then the module will function properly. Settings are shown below.

Lua is a lightweight and compact script language. It can be used by being embedded in radio transmitters and easily reading and modifying the parameter set of modules. The directions for using Lua are as below.

  • Download the elrsV3.lua on the BETAFPV official website or ExpressLRS configurator

  • Save the elrsV3.lua files onto the radio transmitter's SD Card in the Scripts/Tools folder
  • Press the "SYS" button or the "Menu" button on the EdgeTX system to access the "Tools" interface where you can choose "ExpressLRS" and run it
  • The below images show the Lua script if it runs successfully 

 

Custom Buttons

There are two buttons reserved for users to customize its functions. Operation steps are shown below.

  1. Enter the WiFi mode by enabling the module or powering it on for 60 seconds
  2. Once the RGB state indicator is in slow green flashing, the receiver's WiFi will be activated (WiFi name: ExpressLRS TX, password: expresslrs 
  3. Connect your phone or computer to WiFi, and log in to the browser at http://10.0.0.1. You will be able to find the custom button settings page
  4. In the "Action" column, select the desired custom Function; In the "Press" and "Count" columns, select the button press type and the number of presses or duration of the press
  5. Click "Save" to complete the configuration
There are six settable shortcut buttons and two ways to use the buttons: long press and short press. The long press can be set to a custom time duration, while the short press can be set to a custom number of presses. Six settable functions are shown below.

 

The default functions of the module are shown below.

Note: This transmitter hardware does not support button RGB lights.

 

Bind & External Power Supply

The default firmware of the Nano TX V2 module is ExpressLRS version 3.3.0. There is no Binding Phrase pre-set. Hence Binding with transmitters has to ensure that the receiver is using V3.0.0 above with no binding phrase.  

  • Put the receiver into binding mode and wait for the connection.
  • Quick press button 1(Left button) three times to enter the binding mode(factory default setting), or you can enter binding mode by clicking 'Bind' in the Lua script. if the Indicator has turned solid, it indicates that the device has been bound successfully. 

Note: If the transmitter module has been reflashed with a binding phrase, then using the above binding method will not be bound to other devices. Please set the same binding phrase for the receiver to perform automatic binding.

 

The power consumption of the Nano TX V2 module when using a transmission power of 500mW or above is relatively high, which will shorten the usage time of the remote control. Users can provide power to the module by using an XT30-USB adapter cable to connect to an external battery. The usage method is shown in the following figure.

  • The power consumption of the transmitter is not only related to the transmit power but also to the telemetry ratio. When using high power of 500mW and above, the return ratio can be set higher to reduce power consumption and extend use time.
  • For example, in Gemini mode, the power consumption of setting the return ratio to 1:128 is 1000mA, while the power consumption of setting the return ratio to 1:2 is only half of 1:128.

Note: When the voltage of the remote control battery or external battery is lower than 7V (2S) or 10.5V (3S), please do not use the 500mW and 1W, otherwise the module will be rebooted due to insufficient power supply, resulting in disconnection and loss of control.

 

FAQ

1. Unable to enter LUA script, possible reasons are as follows: 
  • The TX module is not well connected to the remote control, need to check whether the Nano pin of the remote control and the TX module socket are in good contact
  • The version of the ELRS LUA script is too low and needs to be upgraded to elrsV3.lua
  • If the baud rate of the remote control is too low, set it to 400K or above  (if there is no option to set the baud rate of the remote control, you need to upgrade the firmware of the remote control, e.g., the EdgeTX needs to be V2.8.0 or above)
  • Target Name: BETAFPV Nano V2 2.4GHz/915MHz/868MHz TX

2. Packet Rate cannot be set to F1000 or prompt "Baud rate is too low".
  • Reason: The problem is caused by the baud rate of the remote control is too low because the F1000 packet rate needs above 400K baud rate support to work
  • Solution: You first need to update the baud rate (greater than 400K is fine) setting in the Model Setup menu or System menu->Hardware, and then reboot the remote control to make sure the baud rate setting has been applied

3. The packets between the remote control and the TX module are less than 1000, while the F1000 packet rate is turned on.
  • Reason: This issue is caused by synchronization issues with the remote control system EdgeTX
  • Solution: Upgrade the EdgeTX version of the remote control to 2.8.0 or above

 


    Package Includes:

      • 1 * Nano TX V2 Module
      • 1 * T-LED Antenna
      • 1 * USB to Type-C Data Cable
      • 1 * Type-C Male to XT30U Male Power Cable
      • 1 * Instruction Manual
      • 1 * Service Card

      Shipping Notes
      • Free Standard Shipping on $100+ Orders to the USA.
      • Except Preorder products are shipped in 48 hours.
      • Delivery to the USA:
      1. Standard Shipping : 3-10 business days
      • If time is of the essence, please consider selecting expedited delivery for faster service.
      Exchange/Return Notes
      • We offer a 30-day return/exchange service after receiving.
      • Final sale items are not eligible for returns or exchanges.
      • To process your return/exchange, please contact us at [email protected]
      • Please click here for more details>>> Return & Exchange Policy
      SKU: 59554420641

      Discover Niche Categories That Outsell

      Top-Converting Item to Boost Your Average Order

      4.2 ★★★★★
      Based on 1044 reviews
      Sort
      Highest Rating
      Newest First
      Oldest First
      Product Reviews
      C
      Verified Purchase
      Collin M.
      Los Angeles, US
      ★★★★★ 5
      Fun Dog Toy, Relatively Durable, Looks Great, and Squeaker Isn't Annoying!
      Color: Deep Green, Size: 10 IN
      This is a fun and well-made dog toy that’s held up better than expected, especially considering my dog usually makes quick work of stuffed toys. He’s not the most aggressive chewer, but he’s definitely skilled at tearing things up over time, and this one is still going strong so far. The plush armadillo design is adorable and comes in a variety of color options, which is a nice bonus. It has your standard fluff type filling, and I really appreciate that the squeaker has more of that low grunting sound (like a pig), rather than a sharp, high-pitched one. It’s much less annoying to listen to during playtime. The 10" size was just right for my 45 lb dog, offering a good size for tugging and carrying around. Comfortable to hold, seemingly durable so far, and cute design. Seems to be a winner, would recommend!
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on June 28, 2025
      A
      Verified Purchase
      AmazonBob407
      New York, US
      ★★★★★ 5
      Perfect size, cute, reasonably durable, and my dog loves it.
      Color: Pink, Size: 8 IN, Color: Pink, Size: 8 IN
      I ordered this for my 2year old, 55lb Staffy Pitt mix. She’s usually pretty rough on toys. She seems to either destroy them after 15 minutes, or, in a few instances, decides that she likes them enough to treat them more gently, in which they last for months or longer. I have no idea how she chooses, but in this case, she pretty much immediately ripped off part of an ear, but then, and since that time, has played and chewed on it without causing further damage. The toy is pretty adorable and looks and feels well made. It’s not constructed with a super durable material like some toys made for aggressive chewers are, but it’s also not marketed as a toy for aggressive chewers, so the material used is appropriate. The fabric feels dense and of a high quality, and the stitching looks to be of a high quality as well. I chose the 8-inch version in pink, and I’m happy with this size. It’s not too big, nor too small, and is easily portable. It arrived smashed up in a small bag, and I thought maybe it would be deformed when I took it out, but it wasn’t. It unfolded right away and then maintained its normal shape perfectly. Happy with this product, and after receiving it, I ended up ordering another, this time the 6-inch version, and while that is also a nice option, I like, and feel that the 8-inch version is a better deal. If this toy continues to last for a few more months, I would order another one, as my dog enjoys playing with it. It’s not her go to toy, but it is one of the few she keeps in playing rotation on a regular basis.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on September 12, 2024
      P
      Verified Purchase
      princeton von d
      Los Angeles, US
      ★★★★★ 5
      Luxurious Feel, Durable Build… but Full Rotation Privileges Have Been Revoked 💙🦴 🐾
      Color: Blue, Size: 6 IN, Color: Blue, Size: 6 IN
      🐾 Hi, I’m PVD; toy curator, plush critic & occasional chew sommelier. This armadillo arrived beautifully packaged and immediately met my standards for texture, squeak clarity and cuddle factor. I originally gave it 5 stars for quality; and still do! But today I’m updating the review to reflect my current toy lifestyle rotation. 😌 What impressed me from day one: ✔️ High-end plush feel; soft enough to nap on, tough enough for energetic zoom bites and great relief from teething ✔️ Strong stitching; survived multiple “stress tests” (I chewed with intention) ✔️ HQ squeaker; not tinny or annoying, more of a honk ✔️ 6in is perfect size for small breeds; easy to carry during dramatic hallway walks Why it now gets 4 stars from a seasoned toy collector: ✘ As my luxury toy collection expanded, this one gets grabbed less often ✘ Simple design; I now favor more interactive or complex textures ✘ Still “keep-worthy,” just no longer VIP spot on the chaise lounge Best For: • Pups who enjoy soft comfort toys or emotional support snuggles • Light to moderate chewers • Dogs who like to carry their plushes around proudly • Ideal as a teething toy or thoughtful gift 🚫 Not ideal for: power chewers or highly stimulation-driven pups (like me now; my taste evolved) 📝 Final Re-Barks: Still recommend for pups who love cuddly squeaky companions. Great starter plush and great quality; just know that ultra-picky toy enthusiasts may rotate it out once newer models (or squeakier friends) arrive. — PVD (Plush Aficionado, Toy Rotation Director & High-Maintenance Household Icon) 🐶💁🏻‍♂️✨
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on September 17, 2025
      S
      Verified Purchase
      sandy
      Battle Creek, US
      ★★★★★ 5
      Hollypet Gray is excellent
      Color: Gray, Size: 14 IN
      This GrayHollpet comes down the assembly line that produces a good product. It is tough and stays together Don't buy the brown one, it started to fall apart in less than 30 days. These can be a good product!
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on February 3, 2026
      M
      Verified Purchase
      Melissa Overton
      Phoenix, US
      ★★★★★ 4
      Super cute
      Color: Gray, Size: 8 IN
      Super cute in person. Didn’t last two weeks with our aggressive chewer but he sure had fun with it
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 6, 2026

      recommand products