Roll Cage HONDA Prelude (3gen) 2-door Coupe BOLT IN V1

Roll Cage HONDA Prelude (3gen) 2-door Coupe BOLT IN V1This Roll Cage is manufactured according to FIA Appendix J in the following versions: Honda Prelude 2. 0i EX (BA4) and Honda Prelude 2. 0i 16V (BA5) AST Bolt In V1 roll cage with 6 points to the bodyshell, screwed onto 6 reinforcement plates welded to the bodyshell. These reinforcement plates are made of 3mm thick steel and are designed and manufactured specifically for each car, achieving maximum safety and fitting on the chassis. The roll cage is

This Roll Cage is manufactured according to FIA Appendix J in the following versions:Honda Prelude 2.0i EX (BA4) and Honda Prelude 2.0i 16V (BA5)

AST Bolt In V1 roll cage with 6 points to the bodyshell, screwed onto 6 reinforcement plates welded to the bodyshell. These reinforcement plates are made of 3mm thick steel and are designed and manufactured specifically for each car, achieving maximum safety and fitting on the chassis. The roll cage is delivered welded and unpainted, and consists of a main hoop of 45mm diameter in E355 steel, the rest of the structure is made of 40mm diameter in E355 steel. The structure is divided in multiple sections in order to allow an easier assembly in the vehicle

Thanks to our laser scanner technology we guarantee an accurate 3D design that suits in your vehicle.

In the price of this article are included:

- Welded roll cage

- FIA connectors

- Reinforcement plates

- Screws, washers and nuts

- Individual documentation

- Installation manual

- Sticker set

* This structure is designed and built according to the FIA Annex J. Consult with your Federation / Sports Organization the minimum safety requirements specific to your vehicle, version, engine and type of test and / or championship to be played, even if this roll cage fits in all model engines.

* These structures require adaptations and / or cancellations of interior elements of the vehicle (dashboard, door panels, upholstery, rear seats ...)