SKU: 27281213189

Blackmagic Design Spares - DaVinci Main Board - Right v3

Sale price$14884.34 Regular price$16538.15
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Blackmagic Design Spares - DaVinci Main Board - Right v3The Blackmagic Design Spares DaVinci Main Board Right v3 is the primary logic and processing PCB located under the right hand section of the DaVinci Resolve Advanced Panel. As part of the flagship three console grading system, the "Right" panel specifically handles transport controls, the numeric keypad, and specialized editorial functions. The Brain of the Right Console The "v3" designation is critical, as it indicates a specific hardware revision.

The Blackmagic Design Spares - DaVinci Main Board - Right v3 is the primary logic and processing PCB located under the right-hand section of the DaVinci Resolve Advanced Panel. As part of the flagship three-console grading system, the "Right" panel specifically handles transport controls, the numeric keypad, and specialized editorial functions.

The Brain of the Right Console

The "v3" designation is critical, as it indicates a specific hardware revision. Blackmagic periodically updates the internal architecture of the Advanced Panel to improve reliability, reduce power consumption, or accommodate newer high-resolution LCD components.

  • Transport Logic: Manages the communication for the jog/shuttle dial and the high-speed transport buttons (Play, Stop, Reverse).

  • Keypad Matrix: Processes the inputs from the numeric dedicated keys used for timecode entry and node management.

  • Interface Bridge: Contains the internal interconnects that link the Right panel back to the Center panel and eventually to the host workstation via USB/Ethernet.

When to Replace the Right Main Board

Because the Advanced Panel is a significant investment, replacing the Main Board is usually a "last resort" repair when modular component swaps (like individual buttons or encoders) fail to solve the problem.

  • Intermittent Connection: The entire right-hand console "drops out" or fails to be recognized by DaVinci Resolve, while the Center and Left panels continue to work.

  • LCD Failure: If the high-resolution displays on the right panel show "garbage" data, static, or remain black despite the cables being verified as functional.

  • Logic Errors: Multiple buttons or knobs in a specific region stop responding simultaneously, suggesting a failure in the board's multiplexer chips rather than the individual switches.

  • Power Distribution Issues: The board fails to distribute 12V power to the backlight of the buttons or the LCDs.

Key Features of the v3 Board

  • Revision Specific: Designed to fit the mounting standoffs and ribbon cable headers of v3-series Advanced Panels.

  • Pre-Assembled: Includes the FPGAs, voltage regulators, and specialized communication controllers pre-soldered and tested.

  • Professional Grade: Built with high-spec electrolytic capacitors and gold-plated connectors to ensure the low-latency response required for professional color grading.


Technical Installation Note

Replacing a Main Board in an Advanced Panel is a high-level repair that should ideally be performed by a qualified technician or an experienced DIT.

  • Firmware Synchronization: After installing a new Main Board, DaVinci Resolve may prompt for a Firmware Update. It is vital that the panel does not lose power during this process, as the v3 board needs to "handshake" with the other two panels to synchronize the control surface.

  • Ribbon Cable Sensitivity: The Advanced Panels use wide, high-density ribbon cables. These are extremely easy to "crinkle" or misalign. Ensure the pins are perfectly straight before locking the connector tabs.

  • Grounding: Ensure all internal grounding wires are re-attached to the chassis. Without proper grounding, the capacitive touch of the knobs and the Jog/Shuttle dial may behave erratically.

  • Static Safety (ESD): This board contains incredibly sensitive processing chips. Work on a grounded ESD mat and use a wrist strap. A single static spark can "brick" a multi-thousand dollar board.

Important: Before ordering, verify your panel's serial number or open the chassis to confirm "Version 3" is printed on the silkscreen of your existing board. Using a v3 board in a v2 or v1 chassis may result in mismatched cable headers or mechanical fit issues.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 27281213189

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 2169 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Sherry
Belleville, US
★★★★★ 5
Good shelves for the price can be challenging to install correctly
Size: 16 Inch, Color: White, Size: 16 Inch, Color: White
Good quality shelves for the price. Happy with the purchase. They give you assorted hardware to mount each shelf. Wall anchors for masonry or brick and anchors for drywall as well as screws to affix shelf to the wall bracket. The installation was fairly easy but it can be a bit difficult to get the bracket leveled on the wall. The “level” they give you is useless, it is only the tube - not in a housing, so 1 1/2” long. You will need a better level. Basically you place the bracket where you want the shelf to go then make sure it is level and take a pencil to mark the holes. We ended up using a heavier quality wall anchor so only needed 2 anchors instead of the four they send you. Once the bracket is on, slide the shelf onto the bars coming from the bracket and use the 2 set screws to secure it in place. Check for level and if it isn’t you can remove shelf and loosen bracket screws and wiggle the bracket while still attached while retightening screws. We had to re-level one of our shelves this way. Hope this helps and that it makes sense. As for weight capacity I wouldn’t want to put more than a couple of pounds on a shelf. As it is secure, it is hollow inside and too much weight would probably either cause the shelf to sag or damage your wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2025
E
Verified Purchase
Emy R.
Grantham, US
★★★★★ 5
Excellent product with height recommendation
Size: 24 Inch, Color: White, Size: 24 Inch, Color: White
My bathroom renovation is turning out great. These shelves are beautifully stable and show no visible assembly. The idea of ​​these floating shelves is brilliant.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
L
Verified Purchase
Lisa Espinosa
San Leandro, US
★★★★★ 5
Beautiful and sturdy
Size: 24 Inch, Color: White
Excellent quality shelves. All hardware came with them and also the stickers to cover the screws. I also placed a plant on one of the shelves and it’s not leaning and again very nice and secure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
L
Verified Purchase
Lo
San Leandro, US
★★★★★ 5
Great shelves
Size: 24 Inch, Color: White
Easy to assemble and comes with everything you need for drywall or wood. Nice color and texture and comes with stickers to hide the holes underneath. I bought two sets of three. These are very long, so I recommend just using two at a time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
K
Verified Purchase
Khrystal
West Palm Beach, US
★★★★★ 5
JAXPETY Room Divider Panel 6Ft Privacy Screen Wall Divider 88" W x 73" H - 3 Panel Black
Color: Black, Size: 3-Panel, Color: Black, Size: 3-Panel
I was looking for a screen to use while making video calls. I am on a budget, wanted something easy to put together, and would hide my apt in the background. Being on a budget, I thought my purchase qualified for the coupon. I was mistaken but contacted the seller. I received a quick response explaining how the coupon was applied. I was happy with the quick response and explanation which I verified when I went back to the page. The once all put together the screens are light weight and fairly easy to move. they do not seem to be made for easy daily breakdown. However, if you should need to take them apart to move or something, easy to break down. Depending on lighting will depend on if you find them transparent. I don't mind possible vague outlines; I was looking so no real details of my belongings in the background could be seen (shelves; figurines; etc.) My apt living room has no overhead light source, so floor lamps give light. In the 3 photos of 2 of the screens put together; the first is with a lamp in front and back of the screen as well as a tv on. The next has the tv off lamps still on and the screen reflecting the pc monitors. The third is with both lamps and the tv off, monitors on but not as reflective. In the box, you have all the parts you need as well as a small tool and an instruction manual. Item 'bags' are number [though they may come off in the box] to assist with assembly. Now assembly can be easy or hard depending on your abilities and the area you are working in. I have bad knees, so kneeling was not an option for me. My first attempt to put this together, I put the 'feet bases' on while still connecting the top bar. It made it twice as hard, and I stretched the fabric more than was necessary causing wholes around some of the stitching and stretching them a little. As well as causing some stitching to come undone on one of the pictured areas. Once I took off the 'feet bases', I had an easier time to screwing in the top bars. You will still need some hand strength, which I don't have much of, but it is possible. I use the grip things to open pickles jars. Once the screens were assembled, I followed the instructions of tying an outer screen to the inner screen and using the Velcro 'privacy flaps' to complete the connection. I have what I think is low shag carpeting which they were able to stand stably on once I wiggled them into standing straight up and in place. Given these post pandemic times, I am overall happy with both the divider and the price. The 2 things I do not like about the divider is the difficulty putting in the top bar [after connecting the top and sides] and storability when not in use issue I am having. Others with larger space will likely not have the last issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2025

recommand products