Aftermarket Assassins 2022-Up RZR Pro R 4 Cylinder AA ECU Flash
SKU: 15732489126

Aftermarket Assassins 2022-Up RZR Pro R 4 Cylinder AA ECU Flash

Sale price$177.75 Regular price$197.50
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Aftermarket Assassins 2022-Up RZR Pro R 4 Cylinder AA ECU FlashAA ECU flash for 2022 Up RZR Pro R 4 Cylinder Models **Requires ECU to be sent in for programming** Works with all models including ones with Dynamix and or Evap models. Looking for the best most badass ECU tuning available for your RZR Pro R? AA's performance tunes are now available to gain horsepower and torque. Through our advanced ECU tuning we are able to modify parameters correctly to gain you the power needed. We are highly experienced in

  • AA ECU flash for 2022-Up RZR Pro-R 4 Cylinder Models  **Requires ECU to be sent in for programming**
  • Works with all models including ones with Dynamix and/or Evap models.  
  • Looking for the best/most badass ECU tuning available for your RZR Pro-R?  AA's performance tunes are now available to gain horsepower and torque.  Through our advanced ECU tuning we are able to modify parameters correctly to gain you the power needed.  We are highly experienced in tuning RZR's and this will show.
  • The Pro R uses a new Bosch MG1 ECU.  Currently no programmers like the PV3 are available and no ETA, so sending your ECU in for a bench flash is the only way to get a great tune.  
  • Big horsepower gains depending on the level of tune/modifications(see below tune descriptions for more details)
  • Much quicker throttle response and power delivery giving a whole new feel to the vehicle
  • Throttle by wire limiters disabled
  • Fan on/off at 185 degrees Fahrenheit (Stock is 190) which is just above the thermostat opening temp.  The progressive fan also ramps up in quicker to keep you running cooler than OEM. 
  • Speed limiter removed in low and high gears (Most will be able to run over 100mph!)
  • More throttle % in low gear and reverse
  • Rev limit at a safe 8800 RPM(stock is 8650).  Ideal peak RPM is 8200-8500 with the flash, but 8800 is for ramp up overshoot/top speed.
  • AA's wicked timing curve is safe for the fuel used, but we do a much better job of finding timing limits for ramp up/more torque.  Many others simply focus on wide open throttle timing/fueling.
  • AA's modified fuel curve will still get decent mileage cruising, but is corrected over the factory lean AFR when needed. 
  • Level 1 Tune:  This tune can be run on a bone stock Pro-R on 91-93 octane fuel.  This tune adds +10-11rwhp (15-16 crank horsepower) putting you at roughly 240 crank horsepower with just a flash!  We would highly suggest our clutch kit with this tune to help with belt grip and gain additional low to mid range power.  This tune can be run with an aftermarket exhaust without any issue, but our level 2 tune is the best option for aftermarket exhaust as it's slightly richer for more power.
  • Level 2 Tune:  This tune is developed for a Pro-R with aftermarket exhaust on 91-93 octane.  It has just a bit more timing and a bit more fuel over level 1.  This tune adds +16rwhp peak and a massive +19rwhp at 38mph (This is gaining roughly +25 crank horsepower) putting you at roughly 250 crank horsepower with just a flash and exhaust!  We would highly suggest our clutch kit with this tune to help with belt grip and to help drive the extra power to the wheels.  Due to how these motors/tuning works, this tune should work with about any aftermarket exhaust, but was tested and designed with our AA slip-on exhaust (header now available). 
  • If you're unsure if your Pro-R is an EVAP model or not, check your Emissions Control sticker located on the front driver's side frame rail above the master cylinder. See pictures for location. 
  • More tunes coming soon!
  • The ECU is located behind the passenger (rear passenger if 4 seat) seat. Remove the top panel behind the seats, then remove the fabric panel to expose the ECU.  Remove the torx bolts and ECU connectors.
  • *** ECU MUST BE SENT IN FOR PROGRAMMING:  Aftermarket Assassins, 2348 75th Ave, Osceola, WI 54020  ***
  • Customer is responsible for shipping to AA, a shipping label is not included in the price
  • Programming turnaround will vary, but is normally 1-2 days. 
  • Express ECU service for US main 48 states only.   We'll send you a next day UPS label, and ship your ECU ONLY back via next day.  All other pats will be shipped ground unless otherwise specified/selected during order checkout.  Keep in mind we cannot guarantee same day programming or control UPS shipping times/delays.  We will do everything possible to turn the ECU around as fast as possible.
  • When the ECU arrives we'll read your stock file to determine if it's a EVAP model or standard, and we'll keep a file folder for your stock/tune files. We'll then flash with the correct AA tune.  
  • If you ever need to go back to the OEM  tune we charge $95 which includes shipping back to you (shipping back for lower 48 US only).  Please contact us if you need to go back to your OEM tune.  
  • MAKE SURE you insure your ECU for $700.  AA is not responsible for shipping delays or lost ECU's. While more expensive over Priority Mail or Fedex, UPS has been the most reliable carrier in our experience. 
  • Why AA tunes over others?  We have been tuning UTV's with CVT clutches for a long time, longer than almost anyone in our field going back to the 800 RZR.  Tuning a CVT vehicle properly is not an easy task as you have so many variables at one time.  We spend the time to wheel dyno(with actual UTV tires) correctly per modification, and have advanced ECU calibration and clutching knowledge to do so. Every change in horsepower can result in us changing clutching several times. We also develop most of our supporting mods so we know everything works correctly, and build parts to fit the vehicles needs.  Lastly and honestly the most important; we then back up our results with real world data logging on local trails and our facility on 110 acres.  It's this combination that truly makes the difference and why AA normally has a faster vehicle with the same or less rated tune horsepower.   We left nothing on the table on the Pro R bolt-on parts, if others claim more power/gains for the same mods use caution in believing it! 
  • If you have any other needs in these tunes, or any concerns; please e-mail!
  • Follow this link for instructions on locating/removing ecu
  • Oh... and get ready for your RZR to flat out rip!

Shared Shipping of $18.99 to the Lower 48

jds 1/27/23

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 15732489126

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 2286 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jim O
Omaha, US
★★★★★ 4
Great budget multi tool
Style: Corded
Nice little rig that fits the bill for occasional hobby use. The motor is powerful enough to polish and cut without bogging down. Bits attach securely and easily. Light and easy to use. The price is great for this multi tool. Recommended
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 22, 2025
C
Verified Purchase
Chelsea C
Battle Creek, US
★★★★★ 5
Favorite DIY Sidekick
Style: Corded
Bought this for one task: grind away an interfering piece of metal in my door’s strike plate. I was unhappy about spending $20 on another DIY tool for one tiny specific purpose but to my pleasant surprise, I haven’t stopped using this dremel since. I’ve cut and sanded wood projects, trimmed custom cabinet panels, smoothed jagged hole edges, and more. I hardly ever turn the dial past 4 to find a speed I’m comfortable with. It’s very powerful and gives great results. I bought a cheaper one that busted on the first try and I’m so happy this was my next choice. It’s handled all the fixer-upper challenges I’ve asked of it. The starter kit is a little sparse on the good stuff like saw blades and washers but very helpful. The case is convenient. My only gripe is I have to be intentional about placement to get it to close but the cord and extension tool is so long and useful that it makes up for it. It’s a little bulky but comfortable to hold and I’ve been able to reach all the narrow corners and tight spaces I’ve needed. My next project is to cut away some protruding screw threads and my immediate thought was to reach for the WEN rotary. For the amount of value I’ve gotten out of it, this thing has paid for itself a few times already.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
D
Verified Purchase
Dan D.
Fort Morgan, US
★★★★★ 5
Perfect rotary tool for light or heavy project with power.
Style: Corded, Style: Corded
Polishing is my main purpose for using rotary tool. I've had hardell and dremmel before. Heavy use of these tool they get hot and wear out fast. Wen rotary tool is better. It's heavy duty, twice as big, 1.5 lbs, it has big motor and variable speed without the noise. It's perfect for hobbies and for 3in polishing or sanding pad. It's polarized electric plug in. The attachments came with it is superior than any rotary tool I've used. Its a solid product. I can already tell undoubtedly this is a good product if not the best. The other rotary tool have the lock chuck button opposite of the power button which premarturely damages internal mechanism accidentally use the lock button while still spinning. Wen is power button is switch away from chuck lock button. It's not too big nor too small to use. The life expectancy for Wen rotary tool will likely be three times longer than dremmel or hardell in my guess because of its design.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 13, 2026
S
Verified Purchase
Sean B.
Dallas, US
★★★★★ 5
Love this thing. But, love the company even more!
Style: Corded
This is my 1st rotary tool ever. So excited because the things you can do are limitless. I received my tool and only used it 3 times. I was so happy I bought this but then the power switch broke, oddly. I said well, you get what you pay for right? Well, I called the phone number listed here on Amazon, and they answered. I briefly explained what happened, and just asked if I could send them the main unit for replacement. The customer service person asked for my details, order number, etc. Then within a few minutes, he said, Sir, we're just going to send you a new one, if that's okay. I was like huh? I said, I know it's been 8 months and that really would be awesome because I love it! He said we stand behind all of our products and it's the least we can do, and we apologize for any inconvenience. I was like huh? Lol. It really is hard to find service like this these days. To be so excited about a 20 dollar tool, that you've always wanted but just never got around to getting, spending 20 bucks and not only getting a fantastic tool, but getting the authentic service we all deserve, priceless! Thank you so much Wen and Amazon! Hope this helps others that are interested in this really useful and fun tool.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 12, 2023
V
Verified Purchase
Valarie Venuti
Lowell, US
★★★★★ 3
Safety concerns
Style: Corded
The variable speed when base is nice and works very well. However the flexible accessory shaft has a major design flaw., there is no locking mechanism on the flexible shaft making it impossible to tighten the collet down to hold the bit in place. Making it easy for the bit to come out of the flexible shaft while it is rotating at any speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026

recommand products