HP CodeMaster Defibrillator

HP CodeMaster DefibrillatorHP CodeMaster XL+ Defibrillator Features The HP Codemaster XL+ defibrillator is a high performance, high speed defibrillator and charges from 0 to 360 joules in under 5 seconds, plus it offers a variety of advanced options easily customized to meet the needs of your unit. The CodeMaster XL+ Defibrillator by HP is a flexible choice for high use areas of the hospital including operating rooms, intensive care units, cardiac care units, and emergency

HP CodeMaster XL+ Defibrillator Features

The HP Codemaster XL+ defibrillator is a high-performance, high-speed defibrillator and charges from 0 to 360 joules in under 5 seconds, plus it offers a variety of advanced options easily customized to meet the needs of your unit. The CodeMaster XL+ Defibrillator by HP is a flexible choice for high-use areas of the hospital including operating rooms, intensive care units, cardiac care units, and emergency departments, as well as for clinics and ambulatory surgery centers.

• Battery strength indicator LED light
• Back-up AC power
• Documents and stores events
• Shock advisory option
• Adjustable heart rate alarms
• ECG Monitor
• External Paddles
• Recorder
• Alarms and Code Summary
• Biomedically Inspected
• Patient Ready

HP CodeMaster XL+ Defibrillator Specifications

Dimensions and Weight

• Height: 7.9” (20 cm)
• Width: 11.8” (30 cm)
• Depth: 15.6” (39.7 cm)
• Weight: 24 lbs (10.9 kg)

Battery

• Type: Rechargeable, sealed lead-acid battery 4 Ah, 12 V nominal
• Charge time:
  • 2 hours to 90% of full capacity
  • 18 hours to 100% capacity
  • Repeated charging to less than 100% will reduce the useful life of the battery
• Capacity: 2.5 hours monitoring or 50 full-energy discharges or 1 hour monitoring and recording
• AC input: 100 to 230 VAC ±15%, 50/60 Hz
• Battery indicators:
  • Illuminated LED indicates battery is charging
  • Low Battery message appears on the monitor

Defibrillator

• Waveform:
  • Damped Sinusoidal
  • Output Energy (Delivered): 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, and 360 joules
• Charge Control: Push-button on apex paddle and on front panel
• Charge Time: Less than 5 seconds to 360 joules with a functional battery installed
• Paddle Contact Indicator: Shows quality of contact before discharge
• Charge-done Indicator:
  • Display indicates available energy
  • Charge-done light on apex paddle
  • Charge done tone
• Synchronizer:
  • SYNC message appears on the monitor and is annoted periodically on the recorder while in synchronous mode
  • An audiblebeep sounds with each detected R-wave, while a marker on the monitor and sync mark on the recorder strip indicate the discharge point
• Paddles:
  • Standard paddles are anterior/anterior
  • Adult electrodes (83 cm sq) slide off to expose pediatric electrodes (21 cm sq)
  • Paddle cord is 10 feet (3m)
  • Full range of internal paddles available

Monitor

• Input: ECG activity may be viewed through the paddles or patient cable
• Lead Fault: LEADS OFF message and dashed baseline appear on the monitor if a lead becomes disconnected
• Common Mode Rejection: Greater than 100 dB measured as per AAMI standards for cardiac monitors
• Heart Rate Display: Digital read out on monitor from 20 to 280 bpm

Event Summary

• Stores and prints 3 seconds pre-and 8 seconds post-critical event data for up to 28 events
• Data is retained after unit is turned off

Recorder

• Annotations:
  • Time
  • Date
  • Heart Rate
  • Event Markers
  • ECG Mode
  • Selected Energy
  • Actual Delivered Energy
  • Peak Current
  • Patient Impendence
• Recorder Mode:
  • Automatically documents events and ECG during defibrillation episodes
  • The recorder can be configured to run in either real time or with a 6-second delay
• Frequency Response:
  • 0.5 to 40 Hz monitor bandwidth
  • 0.05 to 150 Hz diagnostic bandwidth is selectable