Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Stoßdämpfer hinten schwarz 330mmStodmpfer hinten schwarz 330mm Dieser hochwertige hintere Stodmpfer ist speziell fr China 4T Roller wie Baotian BT49 QT9, BT50 QT9, Buffalo Wind 50, Kymco Filly, Rex RS 450 und Sachs 49er konzipiert. Mit einer Lnge von 330 mm (gemessen von Auge zu Auge) sorgt er fr eine optimale Dmpfung und Fahrstabilitt. Produktdetails: Farbe: Schwarz Lnge: 330 mm (Auge zu Auge) Bohrung unten: 8 mm Bohrung oben: 10 mm Gabelbreite unten: 20 mm Typ: Monodmpfer
Stoßdämpfer hinten schwarz 330mm
Dieser hochwertige hintere Stoßdämpfer ist speziell für China 4T-Roller wie Baotian BT49-QT9, BT50-QT9, Buffalo Wind 50, Kymco Filly, Rex RS 450 und Sachs 49er konzipiert. Mit einer Länge von 330 mm (gemessen von Auge zu Auge) sorgt er für eine optimale Dämpfung und Fahrstabilität.
Produktdetails:
- Farbe: Schwarz
- Länge: 330 mm (Auge zu Auge)
- Bohrung unten: 8 mm
- Bohrung oben: 10 mm
- Gabelbreite unten: 20 mm
- Typ: Monodämpfer (geeignet für Fahrzeuge mit nur einem Stoßdämpfer hinten, nicht für Dualdämpfer)
Montage: Die Fixierung erfolgt mittels einer M10 Schraube am Motorblock, was eine einfache Installation ermöglicht.
Dieser Stoßdämpfer bietet nicht nur Langlebigkeit, sondern auch eine verbesserte Fahrqualität, insbesondere bei unebenen Straßenverhältnissen. Er ist eine ideale Wahl für eine Vielzahl von Modellen und sorgt für ein angenehmes Fahrerlebnis.
Bitte vor der Bestellung nochmals die Abbildungen mit dem Original vergleichen,
da bei einigen Modellen unterschiedliche Versionen verbaut!
Passend für folgende Modelle:
-
AGM Motors:
- GMX450 4T AC
- GMX450 Sport 4T AC
-
BAJA:
- BE 500 4T AC
- Suncity SC50 4T AC
-
BAOTIAN:
- BT49QT-3 4T AC
- BT49QT-9 4T AC
- BT49QT-9R1/3 4T AC
- BT49QT-9S1 4T AC
- BT49QT-9S3 4T AC
-
BENERO:
- City Cruiser 50 4T AC
- GT 50 2T AC
- K2 50 2T AC
- New Retro 50 4T AC
- QT-9 F3 50 4T AC
- QT-12P 50 4T AC
- Retro 50 4T AC
- Retro Style 50 4T AC
- Speedo 50 2T AC
- Speedy 50 2T AC
- Speedy 50 4T AC
- Sunny 50 4T AC
- Warrior 50 4T AC
-
BENZHOU:
- YY50QT City Star 4T AC
- YY50QT-15 Retro Star 4T AC
-
BUFFALO:
- SPIKER 50 4T AC
- TVZ 50 4T AC
- WIND 50 4T AC
-
CHITUMA:
- CTM50QT-7 4T AC
-
DAZON:
- Diamondback 50 4T AC
-
EPPELLA:
- GMX 50 4T AC
-
ERING:
- Smart Rider 50 BT49QT-8 4T AC
- Speedy 50 BT50QT-3N 4T AC
- Sprint 50 BT50QT-3 4T AC
-
EXPLORER (ATU):
- City Star YY50QT 4T AC
- Level 100 ZS50QT 4T AC
- Retro Star 50 YY50QT-15 4T AC
- Wild Eagle 50 ZS50QT 4T AC
-
FLEX-TECH:
- Cavallino 50 4T AC
- Cityleader 50 4T AC
- Cityliner 50 4T AC
- FIRENZE 50 YY50QT-21 4T AC
- FIRENZE 50 ZN50QT-21 4T AC
- Luna 50 4T AC
- NAPOLI 50 4T AC
- Piacenza 50 4T AC
- Riva 50 4T AC
- Speedy 4T AC
- Sprint 10 50 SK50QT-A 4T AC
- Sprint 12 50 SK50QT-B 4T AC
- Thunder 50 4T AC
- Topspeed 50 YY50QT-7A 4T AC
- VENUS II 4T AC
- X1 50 4T AC
- X2 50 4T AC
-
GT UNION:
- Force 50 2T AC
- Manhattan 50 2T AC
- Strada 50 4T AC
- Tempesta 50 2T AC
- Veloce 50 2T AC
-
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1726 reviews
Sort
Product Reviews
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console.
The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse.
I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down.
Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions.
The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall.
The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw.
The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable.
Top arms go on smoothly, cable routing is simple and easy. No complaints about this section.
Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way.
At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026